Murphs' Fender Extender for Your Gen 1 C10 Concours

Murphs\' Fender Extender for Your Gen 1 C10 Concours

Murphs' own Fender Extender, made from high-impact ABS plastic, the same material as the OEM Concours body parts, and made right here in the USA as well!

The Murphs' Fender Extender units come with Murphs' Stainless Steel hardware. Since the Concours fender and Murphs' Fender Extender are made from the same material, most people are simply using ABS pipe cement to glue the units in place. (Note that it must be ABS specific glue only; the multipurpose glue for pvc, cpvc, abs, etc., will not work.)

Silver Installed

Fender Extender Prior to Installation

Installed and Mounted*

While the best installation results will occur by removing the fender, it is an operation that can be done with it in place also. Clean under the back lip of the stock fender, using paint thinner or alcohol. Give the Murphs' Fender Extender a good swipe of ABS glue, let it set for about 45 seconds, then stick it to the fender. The unit is pretty much “stuck" after one minute of holding in place. For best results clamp the pieces together overnight. Full cure time is 24 hours.

Murphs' own Fender Extender is for 1994 through 2006 models only. We also offer the Fenda Extenda from Pyramid for you owners of the pre-94 C10. (Select from the drop down list at the bottom.) If you have a Concours 14, check out our C14 Fender Extender.

Pyramid early C10

Pyramid Fenda Extenda for Pre-94

Shipping in the continental USA is always included in the price!!

* This extender is on our company bike. This is what it and the bike looked like after a 1400 mile ride! The bike is also sporting tip over bars with highway pegs, and our EBC Contour Rotors.

Available Options:

Fender Extenders:


Share Product
Share via E-Mail
Share on Facebook Share on Twitter
0 items
Manufacturer Info
Murphs' Kits
Murphs' Kits Homepage
Other products
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
We Accept