Deluxe Stainless Steel Screw Kit for your Concours!

Deluxe Stainless Steel Screw Kit for your Concours!

The original kit offered from Murphs', the one that started the legend, plus a little extra!

This kit utilizes button-head cap screws made from A2 stainless steel. With an Allen head drive, stripped screws are a thing of the past. No more formation of rust like what happens with the factory screws either!

The washers included with this kit are stainless as well, with neoprene backing. The neoprene helps to secure a "snug" fit to the fairing, reducing the tendency of the screws to back out over time.

This kit includes all screws visible on the fairing, including the windscreen. The same screws can be used on the lower unit of the Rifle System system as well, for those of you so equipped!

Available as an option with this kit, we have what we like to call the "retro kit". This consists of black stainless for the windscreen and inner fairing screws. You can select this option from the drop down menu at the bottom of the page.

The deluxe kit includes the necessary hex keys, and a very helpful screw location chart. (Many customers have commented on this chart as being the most valuable piece of the kit!) It is easy to lose track of where the screws go when putting the fairing pieces back together following routine maintenance, and this chart will prove useful well into the future.

The basic kit includes screws for the following locations:

On the Fairing:

  • HeadLight Access Panel: 2
  • Overflow Cover: 2
  • Front Belly Plate: 2
  • Inside Fairing Pockets Post 93 Inner Fairing Pre 94:  6 (3 each side)
  • Black Fairing Top Position:  2 (1 each side)
  • Behind Windshield:  1 for Post 93, 2 for Pre 94
  • Side Covers:  2 (1 each side)
  • Black Fairing Lower Position:  2 (1 each side)
  • Air Scoops Top Position:  2 (1 each side)
  • Middle Fairing Top Position:  6 (3 each side)
  • Middle Fairing Bottom Position:  4 (2 each side)
  • Inner Fairing Pockets Pre 94:  2 (1 each side)
  • Air Scoops Bottom Position:  2 (1 each side)
  • Front Middle Fairing:  2
  • Belly Plate Rear Position   2 (1 each side)

Windscreen (stock):

  • Bottom Row:  6
  • Upper Sides:  4 (2 up each side)

Also includes:

  • Control Clamps: 4 (2 each side)
  • Master Cylinder Covers: 4 (2 each side)
  • Fuel Tank Ring: 6 (Depending on year)

As stated, the necessary hex keys are included. You may want to order ball drivers also, however.

Remember the kits are slightly different depending on the year of your bike, so be sure to select the right option.

Available Options:

Stainless Kit Model Years:

Stainless Kit Options:


Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Manufacturer Info
Murphs' Kits
Murphs' Kits Homepage
Other products
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
We Accept